How To Set Up Eno

Download Commodity

Download Article

Eagle'due south Nest Outfitters (ENO) is a pop make of hammocks used for leisure and sleeping, while camping or in the comfort of your home or yard. The SingleNest, DoubleNest, and DoubleDeluxe hammock models all concord up to 400 pounds and are made of flexible nylon taffeta that is lightweight, comfy, and quick-drying. The way yous suspend your hammock will depend on how and where you desire to utilize it. Learn how to hang your ENO hammock safely wherever yous are.

1. 1

   Find two trees 10-12 feet apart. Look for two trees that are near ten-12 feet autonomously to hang your hammock when you're outdoors. The trees should exist live and healthy with solid bark and no overhead hazards.

   • Choose trees that are at least a foot (12 inches) in bore to ensure stability.
   • Do non employ trees for mounting your hammock if they are closer together than x anxiety, as your hammock may be too depression to the ground when weight is applied.
   • Cheque with the administrators of the park or natural area you're in before hanging up your hammock. Some have rules and regulations regarding hanging hammocks, as information technology can bear on the health of copse.

2. ii

   Wrap SlapStraps on each tree. Take out your set up of 2 ENO SlapStraps and attach one to each of your mounting trees. The straps should wrap around a wide part of the trunk, most 5 feet from the ground.

   • To adhere a SlapStrap, wrap information technology around the trunk of a tree and concur an end in each paw. Thread i end through the loop on the other stop, then pull until the strap is tight effectually the tree trunk. Practice this with both straps/trees.
   • You can use your own rope or strap system instead of ENO's SlapStraps, just annotation that they may be more than difficult to put up or less safe.

   Advertisement

3. iii

   Have extra precautions to protect trees. Ensure you are using SlapStraps properly as discussed here to avoid any negative impact on the trees you use to hang the hammock. Endeavour placing sticks in between the strap and the tree to lessen friction.

   • Gather a handful of sticks from the ground in your surrounding area. They should be roughly the length of your forearm and of the same diameter equally one another. Note that you need their diameter to be thick enough to stick out from the bawl of the tree slightly.
   • Hang your SlapStraps, and so place the sticks betwixt the strap and the tree, all the mode around, about a paw's width apart between each ane.^[1]

4. 4

   Attach your hammock to the straps. Attach your ENO hammock between the copse past using the provided carabiners on each end of the hammock. Sideslip the carabiner into one of the five loops provided.

   • Your ENO hammock comes with an aluminum wiregate carabiner at either end for attachment to straps. Push to open the gate to put it on 1 of the loops, and so make sure the carabiner is fully closed around information technology.
   • The five adjustment loops available make it piece of cake to adjust the height of the hammock. Merely choose a higher or lower loop depending on how far you want your hammock to be from the footing (recommended 18 inches or lower when occupied).

5. five

   Test and adjust the hammock. Slowly put weight on your hammock once information technology has been fastened to the straps on the trees. Sit and then lay down fully in the hammock to determine if information technology is at the right height.

   • If y'all bear on the footing at all while in the hammock, it should exist higher. Secure the carabiners to a higher loop on each SlapStrap. If you have no more available loops, you need to select trees that are further apart.
   • If it's hard to get into your hammock to brainstorm with, information technology should be lower. Attach the carabiners to a lower loop on the SlapStraps. If yous have no more lower loops, cull trees that are closer together, or purchase Atlas or Atlas 40 straps.
   • The ends of your hammock should be placed into loops so that they are level, or with a slight departure that's comfortable to you lot while you're lying downwardly in it (for example, you may like to take your caput slightly higher).^[2]

Advertisement

1. 1

   Find 2 solid trees for mounting. Hang your hammock between two trees approximately 10-12 anxiety apart. The trees should be alive with sturdy trunks of at least 12 inches diameter and no overhead hazards.

   • The Atlas and Atlas XL can be used to hang hammocks between copse that are further apart due to the extra adjustment loops. Still, a distance of ten-12 feet betwixt the trees is generally ideal. Don't employ trees closer than 10 feet apart.
   • Check with the administrators of the park or natural area you wish you hang your hammock in first. They may accept rules or regulations about hammocks to protect the safety of trees.

2. two

   Wrap Atlas straps around the copse. Utilise the two straps that come with ENO'southward Atlas organisation to secure the hammock to the trees. Wrap a strap around each tree almost five anxiety from the ground.

   • To secure an Atlas strap, pull the multi-adjustment cease (with small loops at intervals along the strap) through the end that has the label and a single larger loop. Pull information technology until the strap is tight around the tree trunk.
   • You are welcome to use other straps or ropes to hang an ENO hammock in this way, but it may not be as easy, safe, or adjustable.

3. three

   Use sticks for extra tree protection. Ensure yous are installing the Atlas straps properly as discussed hither to avoid any harm to the trees you lot're using to hang your hammock. Place sticks in betwixt the strap and the tree to lessen friction as an extra precaution.

   • Assemble a handful of sticks from the footing in your surrounding area. They should each be virtually the aforementioned diameter, and about the length of your forearm. Note that yous need the diameter to be thick enough that the sticks will beetle out from the bark of the tree slightly.
   • Hang your Atlas straps normally, and so identify the sticks between the strap and the tree, all the way effectually the torso, about a hand's width apart between each one.^[3]

4. 4

   Secure the hammock to the straps and adjust. Attach your hammock to the bachelor loops on each Atlas strap with the carabiners at either end. Adjust the hammock to your desired height by changing which loops the carabiners fit into.

   • Atlas straps take a combined full of 30 adjustment loops, while the Atlas Forty has an additional 10 loops and 54 inches of length for maximum adjustment options.
   • Your ENO hammock comes with two aluminum wiregate carabiners at the ends. Visually check that they are closed, and listen for a "click" before you put weight on your hammock.
   • Slowly sit and lay on your hammock to test the height and evenness. Move each carabiner to a higher loop if your hammock is too low to the footing, a lower loop if your hammock is too high, or 1 or the other carabiner to a different loop if the two sides are uneven.

5. v

   Use Helios straps for more lightweight flexibility. Endeavour out the ENO Helios straps if you lot need an extra lightweight design for backpacking, or yous accept a tricky space for hanging. Helios uses a bury splice pattern for extra adaptability.

   • Secure the straps to each tree similar you would with SlapStraps or Atlas, except with Helios you will pull the thin terminate made with strong Dyneema cord through the cease with a thicker polyester strap.
   • Slip each hammock carabiner through the pocket-size loop stop of the string that'southward labeled "Place hammock hither." And so pull the long stop of the cord to adjust the hammock college, or pull on the string between your hammock and the tree to arrange information technology lower.^[4]
   • Note that the Helios straps are designed to hold 300 pounds, rather than the 400 pound maximum that other ENO straps are designed for.

Ad

1. i

   Notice 2 sturdy indoor or outdoor structures for the hanging kit. Hang a hammock more than permanently indoors or outdoors in an area with a lack of suitable copse. Employ a hanging kit to mountain the hammock betwixt whatsoever two structures that contain wooden studs or other sturdy woods material.

   • Find a space with a altitude of about 112 inches betwixt your 2 structures, where you can attach the anchors for the hammock about fifty inches off the ground. Lay your hammock down on the floor between the structures for reference, or hold it up in the space to make certain.
   • Annotation that the hanging kit from ENO is designed for use with stiff wooden structures, like the wooden studs in a home wall. If yous wish to hang your hammock from other structures, yous should choose dissimilar screws and fittings designed for that textile.
   • Never install the hanging kit into trees, as information technology tin can severely impairment them.

2. ii

   Find studs for the hanging kit anchors. If you're hanging your hammock from two walls, yous need to locate wooden studs for the hardware. Apply a hammer and nail to assist you find studs, or an electronic stud finder if you have 1.

   • With a hammer, tap gently along the wall and identify your mitt just above where yous're tapping to feel the vibration of the impact. When you tap where in that location is a stud, the vibration volition be much less and the sound will be a dull thud.
   • You can also use features in a room to determine where studs are. Either edge of a window or door frame volition ever be on studs, and y'all tin measure 16" (typically) away from the center of any known stud to notice the next one.
   • To test any location you lot believe to take a stud, hammer a sparse nail into the wall. If it meets resistance about ½ inch into information technology, there is a stud there. If information technology meets no resistance, there is just hollow sheetrock, which will NOT be suitable for property up your hammock.

3. 3

   Marking and drill into the wall. Employ a pencil to marker where you want your hammock to hang from each wall (about fifty inches from the floor is recommended). So drill a hole in the eye of each stud with a 5/sixteen" drill bit.

   • Make sure you will exist drilling into the centre of a stud by making several more examination holes close together on the wall. When you find the border of the stud, measure ¾ inch in to marking the eye, as a standard stud is ane ½" broad.
   • Using a drill with v/16" drill bit, drill direct into the stud for 3 inches.

4. 4

   Adhere the lag screws, anchors, and steel carabiners. Employ a 9/sixteen" wrench or a socket driver to tighten the included hardware into the wall. You volition tighten down an anchor with a lag spiral into each of your drilled holes.

   • Tighten the lag spiral until the ballast is snug confronting the wall, slightly compressing the sheetrock without damaging it.
   • Replace the aluminum carabiners that come up with your ENO hammock with the heavy-duty steel carabiners provided with the hanging kit. And then attach the carabiners directly to the anchors to hang your hammock.

5. 5

   Opt for a hammock stand up. Use a hammock stand for your hammock if y'all want a very simple process for hanging. Opt for a stand if yous don't have options for installing the hanging kit or using straps on trees, such as in an open indoor or outdoor surface area.

   • Purchase a hammock stand up from ENO for easiest setup. Cull from a standard solo hammock stand up, 1 that tin can hold three different hammocks, or a Roadie stand up that can exist held upward by the wheels of a machine for road trips.
   • Yous can employ other hammock stands for ENO hammocks if you lot wish, as long equally the frame is virtually 10 feet long.

Advertizement

Ask a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertisement

Video

• Buy the Atlas EXT to add more length to whatever of the other strap systems.

Thanks for submitting a tip for review!

Ad

• Get assistance from a qualified professional or person experienced with hanging hammocks if you are unsure about any of these methods, especially installing the hanging kit into walls.

Advertizing

About This Article

Article Summary X

To hang an Eagle's Nest Outfitters hammock, look for 2 copse that are 10-12 feet apart and at least a foot in diameter. Wrap your straps around each tree nigh five anxiety off the ground. Put a few sticks vertically between each tree and its strap to protect the tree. Then, attach your hammock to the straps using its carabiners. Test the hammock by slowly putting your weight on information technology. If the hammock'due south slightly too high or low, move the carabiners to unlike loops on the straps. For more than tips, including how to permanently hang a hammock using a hanging kit, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 257,381 times.

Did this commodity help you lot?

Source: https://www.wikihow.com/Hang-an-ENO-Hammock

Share this post